do not scale from this print .485 12.32 ref .770 19.56 ref "a" "a" pmss-05-22-xx-xx.xx-s shown fig. 1 ipbd-xx-s (no of pos x .165[4.19]) + .040[1.02]) ref .213 ref 5.41 .313 ref 7.95 01 02 =dwc+ .250[6.35] xx.xx .125[3.18] section "a"-"a" dwc-xx-10-600 (see table 1) c1 c-169-xx-xx-t (see table 1) no of positions -02 thru -10 -s: single end -d: double end (select option) lead style -sp: standard power (c-169-xx-sp-t) -hp: high power (c-169-xx-hp-t) wire gauge (awg) [see table 1] -16 -18 -206 -203 -22 -24 end option [available on -d end option only & applies to end 2 housing] -lus: latch up, straight (see fig. 3, sheet 2) -lds: latch down, straight (see fig. 4, sheet 2) option specify in inches (03.00 inch minimum) [use dwc-xx-xx-xxx] assembled length pmss-xx-xxxx-xx-xx.xx-x-xxx wire color leave blank for all black wire c: color coded wire [see color sequence table, sheet 2] = dwc + .500[12.70] xx.xx .125[3.18] fig. 2 pmss-05-22-xx-xx.xx-d-lus shown c2 ipbd-xx-s [different as shown, otherwise same as fig. 1] c c3 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .165[4.19] socket discreet cable assembly by: pmss-xx-xxxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 04/14/2005 2 1 sheet scale: 1:1 housing: valox 457, color: natural contact: phos bronze cable; insulation: pvc wire: tinned copper (not lead free) f:\dwg\misc\mktg\pmss-xx-xxxx-xx-xx.xx-x-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .003[.08] max. 3. parts to be molded to position. 4. minimum pullout force: 5 lbs[22.24 n]. 5. contact must be inserted until retention feature locks into place. 6. all finished goods are to be layer packaged in shipping. 7. only available in tin plating. 8. all parts to pass electrical test upon assembly (including hi-pot testat 1000 volts dc). 9. applications involving severe bending require 6" minimum cable length. 10. see dwl-01-xxx-x-xx.xx-xx-xx for wire processing and crimp dimensions 11. note deleted. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision d
-lus latch- end 1 latch- end 2 [latch up] pmss-05-22-xx-xx.xx-d-lus shown fig. 3 [different as shown, otherwise same as fig. 1] -lds latch- end 1 latch- end 2 [latch down] [different as shown, otherwise same as fig. 1] pmss-05-22-xx-xx.xx-d-lds shown fig. 4 sheet of .165[4.19] socket discreet cable assembly by: pmss-xx-xxxx-xx-xx.xx-x-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing dean p 04/14/2005 2 2 sheet scale: 0.875:1 revision d f:\dwg\misc\mktg\pmss-xx-xxxx-xx-xx.xx-x-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
